Quick Enquiry
led phototherapy in neonatal jaundice

NEONATAL
JAUNDICE

I REX 40

VIEW ALL PRODUCTS +

The New Benchmark in LED Phototherapy Unit

led phototherapy unit manufacturers

I REX 40

LED Phototherapy Unit

I REX 40 Led Phototherapy machine is a whole new way of treating jaundice in neonatal . I REX 40 helps caretakers and physicians to regulate the light needed for treatment, using an inbuilt Light meter.
In this compact, sleek design, lies a sophisticated and powerful Phototherapy unit capable of treating very severe cases of hyperbilirubinemia. I REX 40 uses specially designed Hi Bright blue LEDs, which emit light in 450-470 nm spectrum with peak absorption at 458 nm.

LED Phototherapy Device solutions – I REX 40 LED Phototherapy unit

New born infants are especially at high risk of developing hyperbilirubinemia. It is especially more acute in preborn babies. LED Phototherapy is the clinically proven & technically superior method of treating jaundice in infants. I REX 40 brings the high efficiency of well calibrated LED Phototherapy Unit for treating jaundice in neonatal . This specially designed budget mode, is designed to operate within the AAP parameters** of treating severe cases of jaundice in neonates, optimally and economically.

By ensuring strict adherence to clinical guidelines, I REX 40 ensures faster treatment through uniform light distribution and optimal wavelength and irradiance strength.

One of the key features of I REX 40 is that it is fitted with 24 specially calibrated Blue LED lamps. The intensity can be controlled through a microprocessor controlled electronic.

Attending caretakers’ needs are also taken care with the provision of three white LED lamps for observation. This helps reduce the strain on the eyes while attending to the patients.

Operating I REX 40 is an ease, with its simple user friendly mechanisms. It is compact and can be used in a variety of places. Its ergonomic Y shaped wheel base slips easily under most warmers or bassinets.

Being LED based, there are no unwanted wavelengths such as Ultraviolet and infra red rays, which helps in avoiding skin rashes and weight loss – something that is common in conventional phototherapy.

led phototherapy

Product Features

  • I REX 40 is the first led phototherapy unit designed & manufactured in India to offer in built light meter. This helps the physician to set the desired intensity based on the actual light intensity readings
  • Hi Bright Blue LED Technology. With 24 Blue LEDs specifically calibrated to meet, AAP Norms**, I REX 40 is designed to provide a maximum surface coverage area of 50x30 cms. I REX 40 offer focused light instead of scattered light, thus enhancing the efficiency of the treatment. It also offers the patients extremities with more light at the 30-40 µW/cm2/nm than any other competing phototherapy unit. Most overhead conventional phototherapy units offer low intensity of 12 – 18 µW/cm2/nm
  • 3 White LED lamps for observation purposes.
  • Electronic user interface helps in regulating the desired intensity settings from 15 µW/cm2/nm to 70 µW/cm2/nm without adjusting machine height. This helps caretakers to adjust light settings for newborn patients, depending on the severity of the jaundice
  • I REX 40 is also equipped with a temperature sensor which is particularly useful if the baby is not thermally regulated
  • No Ultra violet – Potential risk of skin damage reduced.
  • No Infrared – No Fluid loss/weight loss / Hyperthermia. This reduces the need for replenishing fluid loss in the newborn.
  • Long life LED at 50,000 hours 000 Hours (with minimal lumen depreciation) vis a vis the standard 2500 hours for CFL Phototherapy units.
  • At 50x30 cms, I REX 40 covers maximum base surface area of the newborn.
  • I REX 40s smaller bezels ensure that the overall size of the PT head is not too large to obstruct caretakers from their duties.
  • Lamp Head Tilt up to 90⁰ in either direction makes it easy to use alongside infant warmer.
  • Clean, functional design. The well balanced Phototherapy stand is made of galvanized steel with epoxy powder coated finish, thus giving the machine an elegant look and yet is very easy to clean.
  • Small footprint: Ergonomic Y shaped design helps not only in terms of balance and sturdiness; it is also useful for minimizing footprint as the PT can easily slide under most warmers and bassinets. This provides more space in NICUs.
  • I REX 40 automatically cuts off at 85⁰C, thus offering higher safety during day to day operations.
  • Electronic LED display which provides patient timer, lifetime LED usage and intensity settings.
  • Lower power consumption at 15W

* Assuming commercial rate of Rs. 7/- per electricity unit (kWh)

** American Academy of Pediatrics: Management of Hyperbilirubinemia in newborn infants 35 or more weeks of gestation. Pediatrics 2004: 297-316

Superior Performance

 
led phototherapy
led phototherapy for neonatal jaundice
led phototherapy unit manufacturers

CLINICAL GUIDELINES

430-490 nm

Should be greater than 30μ W/ cm2 per nm

Light should cover Maximum surface area

I REX 40 PERFORMANCE

450-470 nm

35μ W/ cm2 per nm

50 x 30 cms

Technical Specification

Performance Specification

light sourse - High Bright blue LED
Wavelength - 450-470 nm
Spectral Irradiance - 15 -70μ W/ cm2 nm (at 30 cm height)
Effective Surface Area - 50 x 30 cm
24 Blue LED lamps for treatment
3 White LED lamps for observation
In built light meter with probe for monitoring actual light intensity.
Patient Temperature monitoring with alarm facility in case of hyper/hypothermia. A temperature sensor probe comes as part of the package
LED user control for controlling the intensity and for monitoring the patient treatment time. It also displays the patient temperature

Electrical Specification

Electric Supply - 229-240V, 50/60 Hz
Max Rating - 3A, 220-240W, 50/60 Hz
Fuse - 2A, 220-240W, 50/60 Hz

Physical Specification

Light Unit - 35.5 x 26 x 9 cms
Height - 110 – 170 cms
Clearance of base - 7.5 cms
Light unit tilt adjustment - +/- 180⁰

Environmental Specification

Operating Temperature - 15⁰ C to 40⁰C
Humidity - 0% to 95% non condensing
High Temperature Cutoff - 85⁰C

PRODUCT ENQUIRY

IREX-40

Enter This Code Below
  • UEOpzm
led phototherapy